Re: disable iSCSI
Have you removed all of the static and dynamic targets from discovery? Once disabled, I recall that you have to restart the host to get the iSCSI adapter to dissapear. It may also be worth restarting...
View ArticleClik here to view.
Re: Answer file for host profile questions
Perhaps something like this might work.Haven't been able to test it though $AdditionalConfiguration.Keys|where {$_-like"*ipConfig.IpAddressPolicy.address"} |%{ $AdditionalConfiguration[$_] =...
View ArticleRe: Snapshot VMWARE Esxi 4
Ciao,innanzitutto mi aggrego ad Andrea nel lasciar stare il datastore browser, anche perchè ci sono in realtà ulteriori files che non vedi nemmeno da li e puoi solo incasinare la catena delle snapshots...
View ArticleCentOS kvm - secure enough?
So, this may not be the correct forum, but let me throw this out to everyone,, I was asked about KVM (link) as an option for secure...
View ArticleDevelopment Environment Suggestions
We are currently running production servers in an ESX 4.0 environment. We are looking to setup a development environment which would consist of a couple of hosts running ESXi (free) with local storage...
View ArticleRe: Number of NICS
Mike, I found this article on a 4 NIC per host setup. http://vmwaremine.com/2011/10/04/networking-configuration-for-esx-ot-esxi-part-1/ What do you think about that? I just think adding more NICs is...
View ArticleRe: CentOS kvm - secure enough?
Note: Discussion successfully moved from VMware vCloud Networking and Security to Security and Compliance
View ArticleRe: CPU Ready Time
So VMware support did confirm they believe I am experiencing the bug that lakey81 mentioned. However the patch that supposedly fixed the issue did not. VMware's internal kb says it's still an open...
View ArticleClik here to view.
Re: Missing "real-time" performance data in Cluster level after updating...
Same thing happening to me but not on all hosts... was hoping there would be an answer to this...
View ArticleRe: Number of NICS
Hi, You probably have enough NICs, just don't terminate them all in one switch. If you have sufficient ports to do what they did in the article, have them cross connected, and you have no single point...
View ArticleRe: iscsi mulipathing (vmknic status not used)
thanks for the thought, but as of right now, everything is just using fixed, will certainly try though since this host isnt being used yet
View ArticleRe: Development Environment Suggestions
You could build the environment and restore the VMs. You could have a separate physical switch setup and maintain the IP addressing, but just make sure it isn't routing (or maybe not even connected)...
View ArticleRe: 5.1.0 Connection Broker Question
I have tried checking Use Secure tunnel to desktop and also unchecking it. Interesting part is I cannot even log into the VMware View Administrator web GUI to manage the CB's and pools etc, until I...
View ArticleRe: How to get the ESXi host status that is managed by vCenter by monitoring...
Have you looked at the PowerCLI command Get-VMHost? here you can get the state of the hosts you want to retrieve. The valid values are Connected, Disconnected, NotResponding, and Maintenance.
View ArticleRe: ASUS F2A85-V PRO FM2 AMD A85X (Hudson D4) SCSI Passthrough Support
Hello and welcome to the communities. Note: Discussion successfully moved from VMware ESXi 5 to Community Hardware Software
View ArticleRe: The description of the GatewayNatRuleType is not returned
You can use the vmware website to file an SR, or call vmware support and file SR over the phone
View ArticleRe: DHCP and routed network vapp
That's absolutely not true Eric Lee wrote: Your setup looks a lot like ours. I believe if you uncheck both firewall and nat on the internal vApp network than the vApp would not be connected to the VSE...
View ArticleClik here to view.
Re: Very upset about VCP requirements!
My suggestion is to be patient and search for training at your local Junior College. I took this route and spent $150.00 on the course plus another $50.00 for the text material. Note, I could have...
View ArticleRe: 5.1.0 Connection Broker Question
Are you perhaps using some type of load balancer that is directing you to the down server?
View ArticleRe: vcops appliance vs standalone installation
We recently looked at this and from what I can tell, the vSphere-ui provides the capacity management of your virtual environment. With vSphere UI you get the Risk and Efficiency scores, and you're...
View Article